top of page

Group

Public·113 members

Lw-17-1 Manual


Download ->->->-> https://urlin.us/2tulnb





How to Use the Haier ZHF/LW-17-1 Remote Control for Air Conditioners


The Haier ZHF/LW-17-1 is a hand held remote control that can be used to operate various models of Haier, Chigo and Quietside air conditioners. It has a LCD display that shows the current settings and status of the air conditioner. It also has buttons for adjusting the temperature, fan speed, mode, timer, sleep function and swing angle of the air conditioner. This article will explain how to use the Haier ZHF/LW-17-1 remote control for air conditioners.


Installing the Batteries


The Haier ZHF/LW-17-1 remote control requires two AAA batteries to operate. To install the batteries, follow these steps:


Slide the battery cover on the back of the remote control downwards to open it.


Insert two AAA batteries according to the polarity markings inside the battery compartment.


Slide the battery cover back into place.


Note: Do not mix old and new batteries or different types of batteries. Replace the batteries when the LCD display becomes dim or the remote control does not work properly.


Setting the Clock


The Haier ZHF/LW-17-1 remote control has a built-in clock that can be used to set the timer function. To set the clock, follow these steps:


Press and hold the CLOCK button for three seconds until the hour digits start flashing on the LCD display.


Press the + or - button to adjust the hour setting.


Press the CLOCK button again to confirm and move to the minute setting.


Press the + or - button to adjust the minute setting.


Press the CLOCK button again to confirm and exit the clock setting mode.


Note: The clock uses a 24-hour format. To reset the clock, repeat the above steps.


Operating the Air Conditioner


The Haier ZHF/LW-17-1 remote control can be used to turn on and off, change the mode, adjust the temperature, fan speed and swing angle, set the timer and activate the sleep function of the air conditioner. To operate the air conditioner, follow these steps:


Point the remote control towards the receiver on the air conditioner unit.


Press the ON/OFF button to turn on or off the air conditioner. A beep sound will indicate that the signal has been received.


Press the MODE button to select one of the four modes: AUTO, COOL, DRY or HEAT. The corresponding icon will appear on the LCD display.


Press the + or - button to adjust the temperature setting. The temperature range is 16ÂC to 30ÂC (61ÂF to 86ÂF).


Press the FAN button to select one of the three fan speeds: HIGH, MED or LOW. The corresponding icon will appear on


the LCD display.


Press the SWING button to adjust the swing angle of the air flow. You can choose from five options: OFF, UP, MID, DOWN or AUTO. The corresponding icon will appear on


the LCD display.


Press the TIMER ON or TIMER OFF button to set a timer for turning on or off


the air conditioner. The timer can be set from 0.5 hours to 24 hours in 0.5 hour increments. The TIMER ON or TIMER OFF icon will appear on


the LCD display along with


the time setting.


Press


the SLEEP button to activate


the sleep function. The SLEEP icon will appear on


the LCD display. The sleep function will automatically adjust


the temperature and fan speed according to


the room temperature and time duration for a comfortable sleep.


Note: The remote control has a memory function that will retain


the last settings when


the air conditioner is turned off and on again. a474f39169






About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page