Unicdma 3.1.4
Download File >>> https://urlin.us/2tuoSO
How to Use Unicdma 3.1.4 to Unlock Your CDMA Phone
If you have a CDMA phone that is locked to a specific carrier, you might want to unlock it so that you can use it with any SIM card. One of the tools that can help you do that is Unicdma 3.1.4, a software that can read and write the ESN (Electronic Serial Number) and MEID (Mobile Equipment Identifier) of your phone.
In this article, we will show you how to use Unicdma 3.1.4 to unlock your CDMA phone in a few simple steps.
What is Unicdma 3.1.4
Unicdma 3.1.4 is a software that can read and write the ESN and MEID of CDMA phones. It can also change the PRL (Preferred Roaming List) and SPC (Service Programming Code) of your phone. By changing these parameters, you can unlock your phone and use it with any SIM card.
Unicdma 3.1.4 supports most CDMA phones from Samsung, LG, Motorola, HTC, Huawei, ZTE, and more. It works with Windows XP, Vista, 7, 8, and 10.
How to Use Unicdma 3.1.4 to Unlock Your CDMA Phone
To use Unicdma 3.1.4 to unlock your CDMA phone, you will need the following:
A CDMA phone that you want to unlock
A USB cable that is compatible with your phone
A computer with Unicdma 3.1.4 installed
A SIM card from another carrier that you want to use
Once you have everything ready, follow these steps:
Connect your phone to your computer using the USB cable.
Launch Unicdma 3.1.4 on your computer.
Select the COM port that corresponds to your phone.
Click on "Read" to read the ESN and MEID of your phone.
Write down the ESN and MEID of your phone for backup purposes.
Click on "Write" to write a new ESN and MEID to your phone.
You can either generate a random ESN and MEID or enter a specific one that you want.
Click on "OK" to confirm the changes.
Your phone will reboot automatically.
After the reboot, insert the SIM card from another carrier into your phone.
Your phone should now be unlocked and ready to use.
Tips and Warnings
Before using Unicdma 3.1.4 to unlock your CDMA phone, keep in mind the following tips and warnings:
Make sure you have a backup of your original ESN and MEID in case something goes wrong.
Make sure you have enough battery power on your phone before starting the process.
Make sure you have the correct drivers for your phone installed on your computer.
Do not disconnect your phone from your computer during the process.
Do not use Unicdma 3.1.4 for illegal purposes or to clone someone else's phone.
Use Unicdma 3.1.4 at your own risk. We are not responsible for any damage or loss that may occur as a result of using this software.
How to Change the PRL and SPC of Your CDMA Phone
Another feature of Unicdma 3.1.4 is that it can change the PRL and SPC of your CDMA phone. The PRL is a list of networks that your phone can connect to, and the SPC is a code that allows you to access the programming menu of your phone. By changing these parameters, you can improve the signal quality and performance of your phone.
To change the PRL and SPC of your CDMA phone using Unicdma 3.1.4, follow these steps:
Connect your phone to your computer using the USB cable.
Launch Unicdma 3.1.4 on your computer.
Select the COM port that corresponds to your phone.
Click on "PRL" to open the PRL menu.
Click on "Read" to read the current PRL of your phone.
Write down the current PRL of your phone for backup purposes.
Click on "Write" to write a new PRL to your phone.
You can either select a PRL file from your computer or enter a specific PRL number that you want.
Click on "OK" to confirm the changes.
Your phone will reboot automatically.
After the reboot, check the signal strength and network name on your phone.
If you are not satisfied with the new PRL, you can restore the original one by repeating the steps above.
To change the SPC of your CDMA phone using Unicdma 3.1.4, follow these steps:
Connect your phone to your computer using the USB cable.
Launch Unicdma 3.1.4 on your computer.
Select the COM port that corresponds to your phone.
Click on "SPC" to open the SPC menu.
Cl